This is a layer-2 POE Ethernet switch with level 3 lightning protection. There are 4 POE ports with a total output power of 36W. Up to 4 cameras can be connected at a bit rate of less than 4Mbps each.

These PSU's can be used to provide power for HDCVI cameras, WiFi cameras, door bells or any device that has power requirements that fit within the 12V, 2A budget.

The unit is suitable for outdoors use aswell as it is waterproof. 

Powered with a rechargeable battery and connected by Wi-Fi, Cell Pro can be placed anywhere you want and the IP65 weatherproof design makes it easy to keep an eye on your home, inside or out, rain or shine.

We are yet to find a reliable way to transmit power wirelessly over long distances however so every six months or so, depending on the activity within a monitored area, you will need to dismount the camera and charge the battery.

If this is too much of a hassle you could however just mount this solar module a suitable area near the camera, plug its  cable into the cameras USB port and it will ensure the cameras battery is toped up when ever the sun is available.

[product_description]

When looking for a hassle free installation the Solar module is a great power source for outdoor and indoor cameras alike. there will just be a bit of drilling for indoor camera as the module will need to be outside. 

[/product_description]

[unique_description_1]

• Max. Power: 3W±5% @4000lux
  
• Output Voltage: 5.75±5%
  
• Output Current: 0.5A±5%
  
• Dimensions: 198x140x29mm (7.8x5.52x1.14inch)

[/unique_description_1]

This is a layer two Hardened POE Switch, which has 8x 10/100Mbps POE ports (Port 1 &2 are Hi-Power), 1x 100/1000 Mbps optical port and 1x 10/100/1000Mbps Ethernet uplink port. It has high level lightning protection works under a wide range of temperatures and is specially designed and built to perform in the outdoors and the harshest environments.

These Switching power supplies are specially designed for use to provide power to a myriad of Electronic circuits in applications where compact dimensions and performance are a must. The maximum output current for this 150W is 12.5Aand that is enough to power quite a few devices. 

These Switching power supplies are specially designed for use to provide power to a myriad of Electronic circuits in applications where compact dimensions and performance are a must. The maximum output current for this 50W is 4.2A and that is enough to power quite a few devices. 

Distributed PSU's are typically used when installing HDCVI/Analog Solutions, located right next to the DVR, as a central point from which to source 12VDC power for individual cameras. This particular unit is able to supply power to up to 19 cameras from 19x 3A fused channels with individual LED indicators.

Distributed PSU's are typically used when installing HDCVI/Analog Solutions, located right next to the DVR, as a central point from which to source 12VDC power for individual cameras. This particular unit is able to supply power to up to 9 cameras from 9x 3A fused channels with individual LED indicators.

Distributed PSU's are typically used when installing HDCVI/Analog Solutions, located right next to the DVR, as a central point from which to source 12VDC power for individual cameras. This particular unit is able to supply power to up to 9 cameras from 9x 2.5A fused channels with individual LED indicators.

Distributed PSU's are typically used when installing HDCVI/Analog Solutions, located right next to the DVR, as a central point from which to source 12VDC power for individual cameras. This particular unit is able to supply power to up to 5 cameras from 5x 2.5A fused channels with individual LED indicators.